Transmission Oil - CanyCom CM1801 Operator's Manual

Oil drain plug
Oil discharge port
Oil level check bolt
Lubricating plug
MAINTENANCE
Replacement
1. Prepare a suitable container to collect drained oil.
2. Remove oil drain plug and drain oil from crankcase.
Hot oil can cause burns.
Properly dispose of drained oil.
3. Replace oil drain plug.
4. Remove oil gauge and pour the designated oil from the
lubrication port.
7.4.2

Transmission Oil

Inspection
1. Park machine on horizontal surface.
2. Remove the oil level check bolt and check if oil comes
out from the bolthole. (Check if oil has reached the check
bolthole.)
Amount of oil :
(Up to a point where oil reaches the oil level
check bolthole)
To add oil
1. Remove lubricating plug.
2. Pour the designated oil from the lubrication port.
Oil to be used :
– 31 –
CAUTION
N O T E
page 28
page 28