Engine; Engine Oil - CanyCom CM141 Operator's Manual

Engine

• Always stop engine and remove ignition key before servicing.
• An engine that has been running is very hot. Allow engine to cool before
servicing, or severe burns may result.
• Keep fire away from machine when servicing.

Engine Oil

• Make certain to fill engine with correct grade of oil to the specified level.
Insufficient amount or wrong grade of oil reduces performance and may cause
permanent damage to engine.
• Dispose of the drained oil properly.
NOTE
• To obtain correct reading, check oil level before starting, or wait about 10 minutes
after stopping engine to allow oil to drain back to oil pan.
• Always check oil level on a level surface.
• Oil to Use: Page 34.
• Oil Capacity: Page 34.
5331M-0506-010E
Maintenance
Inspecting
1.
Oil Filler Cap
2.
3.
-39-
Park machine on a level surface.
Remove oil filler cap and wipe it clean.
Insert oil filler cap and pull it out.
5