Greasing Points - CanyCom CM141 Operator's Manual

Greasing Points

• Grease regularly. Insufficient greasing may result in seizure or rusting, affecting
smooth operation of machine.
NOTE
• When using a manual grease pump, push handle five to six times. When handle
becomes heavy, stop pushing.
• When using a pneumatic grease pump, charge for two to three seconds.
Greasing Points
Location
1 Knuckles, front axle
2 Center pivot, front axle
3 Cutting rotary drive shaft
4 Cutting rotary link pivots
5331M-0503-010E
Maintenance
Schedule
Every 6 Months
Every 6 Months
Every 6 Months
Every 6 Months
-33-
Grade
Chassis Grease
Chassis Grease
Chassis Grease
Chassis Grease
5