Handheld Device (Hhd); Testing; Mechanical Testing; Electronic Testing - Schlage AD-250 User Manual

AD-250 Offline Lock User Guide
!
The Handheld Device is used for programming and setup only.
The Handheld Device (HHD) is used to configure locks. This includes transferring data files between
the access control software and locks. For information about the HHD, see the Schlage Utility
Software User Guide.
If you encounter problems while performing any of the following tests, review the installation guide
and correct any problems.

Mechanical Testing

1. Insert the key into the keyway and rotate the key, or the key and the inside lever, to open the door.
Operation should be smooth, and the latch should retract.
2. Insert the key into the keyway and rotate the key or the key and the outside lever, to open the
door. Operation should be smooth, and the latch should retract.

Electronic Testing

1. Press the Schlage button one time. The keypad backlight will light blue.
2. For locks with a card reader, present a user credential to the reader. The lock will beep and the
Schlage button will light green. The Schlage button will blink red twice when the credential is not
valid for the lock.
ÎThe first credential presented to a new lock becomes the master construction programming
credential. See Getting Started on page 3 for more information.

HANDHELD DEVICE (HHD)

TESTING

4