Telephone Blocking; Handset Telephone Lock - Siemens HiPath 3000 Operating Instructions Manual

Gigaset sl2 professional in hipath cordless office
Hide thumbs Also See for HiPath 3000:
Table of Contents

Advertisement

Telephone blocking

Step by step
Ð
st
H/Set Settings
st
Handset
st
Change HSPIN
118
Telephone blocking

Handset telephone lock

You can protect your handset against unauthorised ac-
cess by entering a 4-digit numerical code to lock it.
The PIN is preset to "0000" (default). The handset does
not prompt for a PIN in this setting. As soon as you have
changed the PIN you will need to enter it when you turn
on the handset.
Enter the value "0000" again to deactivate the PIN.
Entering a new PIN
©
or w Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the old PIN. If a PIN has not yet been set, then en-
ter "0000".
o
Enter the new PIN.
s Move the cursor down one line.
o
Repeat the new PIN.
[
Confirm your entries.
a
Press the On-hook key to end the operation.
Battery charging when PIN lock active
If the handset deactivates because the battery pack is
flat, it automatically reactivates as soon as you place it
in the charging shell. The charging operation starts. If
you have already set a PIN, you must enter it so that the
handset can receive calls.
Attention:
If you have forgotten your PIN, please contact
Siemens Service. The PIN will be reset at your
own expense.

Advertisement

Table of Contents
loading

Table of Contents