Siemens HiPath 3000 Operating Instructions Manual page 93

Step by step
> <
Exit list?
> <
View conf parties?
> <
Remove party?
> <
Withdraw?
Closing the conference party list
Call the additional menu.
Mnu
[
Select the menu item and confirm. The conference par-
ty list is closed.
Disconnecting a party from the conference
As the convener of the conference, you can disconnect
users from the conference.
p
You are connected with two or more partners in a con-
ference call.
Call the system menu.
Menu
[
Select the menu item and confirm. The first party is dis-
played.
>
Display the required party.
Select the menu item and confirm.
Mnu
[
Select the menu item and confirm. The relevant party is
disconnected from the conference.
Connecting parties
As the conference convener, you can leave the confer-
ence and thereby connect the other parties with each
other. If you were previously connected with two or
more parties, the other parties remain in a conference.
Otherwise, the remaining two users conduct a one-to-
one call.
p
You are connected with two or more partners in a con-
ference call.
Call the system menu.
Menu
[
Select the menu item and confirm. The first party is dis-
played.
a
Press the On-hook key. You leave the conference; the
remaining parties are connected with each other.
Conducting calls – with multiple users
85