System Appointment Function - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
c
> <
Service?
> <
* 46=Timed reminder
on??
Remind at (HHMM):
> <
One time only?
> <
Daily?

System appointment function

You can use your handset to enter a single appointment
for the next 24 hours or an appointment that recurs on
a daily basis.
When the appointment is due, your handset rings for
approx. 20 seconds to remind you of your appointment.
The entered appointment appears on the display. This
appointment call is deleted when you confirm it. Alter-
natively it is deleted automatically after it has been re-
peated 5 times at one-minute intervals.
This function can also be called by entering the code
( Page 122).
Saving an appointment
d
Press and hold down the Talk key or press the Speaker-
or
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the required time.
Note the required data format: Appointment at (HH-
MM); HH = two-digit hour setting mm = minutes, two
digits For example: 0905 for 9.05 (= 9.05 a.m.) or 1430
for 14.30 (= 2.30 p.m.).
either:
[
Select the menu item.
or:
[
Select the menu item and confirm.
then:
Save the settings.
Save
a
Press the On-hook key to end the operation.
Additional functions
109