Conducting Calls With The Headset; Corded Headset; Cordless Headset - Siemens HiPath 3000 Operating Instructions Manual

Step by Step

Conducting calls with the headset

The handset can be used with a corded and cordless
headset.

Corded headset

You can connect a corded headset via the jack on the
underside of the handset. The headset must have a
SLIM Lumberg connector.
The receiver inset and microphone functions are activat-
ed on the headset once it is connected.

Cordless headset

You can use a cordless, Bluetooth-enabled headset
with your handset. This means your hands are free
while making calls and there are no annoying cables to
disrupt your computer work in the office or on the road,
forexample.
Your Bluetooth headset must be registered on your
handset before you can use it for the first time. After
this, you can continue to use your Bluetooth headset
until you decide to deregister it.
Note:
• Theoretically, third parties can tap Bluetooth
connections.
• To improve protection against unauthorised
tapping, deregister any Bluetooth devices
you no longer require.
You can use voice dialling to initiate a call from your
Bluetooth headset.
During a call, a second caller is not signalled via the
Bluetooth headset.
Conducting calls – enhanced functions
41