Table of Contents
Advertisement
3. WHITE BALANCE
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
Use the appropriate mode according to your purposes among these three modes.
* ATW
:
Use this mode when the color temperature is from 1,800K to 10,500K.
:
* AWB
The function to search for the color which is matched well with the ambient environment. This
be used when the color temperature is from 3,000K to 7,000K.
:
* AWC→SET
After letting camera focus on the blank white paper to the best condition of current
lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment
should be needed.
* MANUAL
:
Manual compensation make the more detailed control possible. First, after adjusting the
white balance using the ATW or AWB mode, change the mode into the manual compensation mode
and then press Set button. While looking at the color change of the subject seen on the screen after
setting up the proper color temperature, increase the each value of the blue and the red.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
MANUAL
KELVIN
MIDDLE
R-GAIN
IIIIIIIIII IIIIIIIIII
B-GAIN
IIIIIIIIII IIIIIIIIII
RETURN
26
DC
ATW
OFF
MIDDLE
AUTO
|
10
|
10
Advertisement
Table of Contents
