WHITE BALANCE
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal' by using the Up and Down buttons so that
the arrow indicates 'White Bal'.
2. Select a desired mode using the Up and Down buttons.
※ Select one of the following 6 modes, as appropriate for your purpose.
>> MODE :
- ATW : Select this when the color temperature is between 1,800˚K and 10,500˚K.
- AWB : The function to search for the color which is matched well with the ambient environment. This be
used when the color temperature is from 3,000K to 7,000K.
- INDOOR : Select this when the color temperature is between 3,100˚K.
- OUTDOOR : Select this when the color temperature is between 5,100˚K.
(sodium light inclusion)
- AWC → SET : To find the optimal luminance level for the current environment, point the camera towards
a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it.
SETUP
1. FOCUS
2. EXPOSURE
3. WHITE BAL
4. DAY&NIGHT
5. BACKLIGHT
6. SPECO DNR
7. IMAGE ADJ
8. SPECIAL
9. RESET
10. RETURN
WHITE BAL
1. MODE
2. PUSH
3. RED GAIN
4. BLUE GAIN
5. RETURN
- 19 -
OFF
ATM
- - -
- - -
- - -