Voice - Cisco TES301 User Manual


No Answer Forward—Select an option to enable or disable call forwarding-
on-no-answer. If you select Enabled, enter the phone number to which you
want to forward incoming calls in the associated Forward To field.

No Answer Timeout—Enter the number of seconds to wait before
forwarding a call using the forwarding-on-no-answer feature.

Speed Dial Entry 1-10—Enter up to 10 phone numbers that you want in your
speed dial directory. When you place a call for the number you entered in
Speed Dial Entry 1 field, simply press 0#. To call the number for Speed Dial
Entry 2, press 1#; for entry 3 press 2#, and so forth.

Call Block Entry 1-10—Specify up to 10 phone numbers you wish to block all
incoming calls.
3 Click Save Changes to save the information or Cancel to return to the
dashboard.

Voice

Voice Parameters listed on this tab can improve voice quality. If you want to use
FAX service, you need to select the FAX mode that matches the remote FAX device.
Complete the following steps to configure the Voice parameters for your VoIP
settings.
1 From the TES301 dashboard, click the Change Settings button located in the
VoIP Settings cell.
4038767 Rev B
VoIP Settings
31