Cisco TES301 User Manual page 60

Chapter 3 Configuration and Operation of the TES301
2 Click the Wi-Fi Protected Setup tab.
3 Select the network you want to associate with the wireless client device: Home
Network or Guest Network.
4 Use one of the following methods to pair devices.

If your client device has a Wi-Fi Protected Setup button, then:
–
–
–

If your client device has a Wi-Fi Protected Setup PIN:
–
–
–

If your client device requests the Gateway's PIN, enter the PIN number listed
on this screen. (It is also listed on the label on the bottom of the Gateway).
5 After the client device has been configured, click OK button. The Wi-Fi Protected
Setup Status, Network Name (SSID), Security, Encryption, and Passphrase are
displayed at the bottom of the screen.
6 Refer to your client device or its documentation for further instructions.
42
Click or press the Wi-Fi Protected Setup button on the client device.
Click the Wi-Fi Protected Setup button on this screen.
After the client device has been configured, click OK button. Then refer
back to your client device or its documentation for further instructions.
Enter the PIN number in the field on this screen.
Click the Register button.
After the client device has been configured, click OK button. Then refer
back to your client device or its documentation for further instructions.
4038767 Rev B