Cisco TES301 User Manual page 32

Chapter 2 Installing the Home Gateway
4 Insert a standard RJ-11 telephone cable into the PHONE 1 port and connect the
other end to an analog telephone, cordless phone base station, or fax machine.
Note: To prevent an invalid connection to the circuit switched Telco network, do
not connect an RJ-11 telephone cable from the PHONE 1 (or PHONE 2) port on
the TES301 to the wall jack.
5 (Optional) You can connect the PHONE 2 port to a second analog telephone or a
fax machine.
6 (Optional) Connect additional PCs, or other Ethernet devices, such as an IP set-
top, to an ETHERNET port using a standard RJ-45 Ethernet cable.
14 4038767 Rev B