Configuring The Voice Port - Cisco VG400 Software Configuration Manual

Configuring with the Command-Line Interface
6. write
7. reload
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router>enable
Step 2 configure terminal
Example:
Router# configure terminal
Step 3
license accept end user agreement
Example:
Router(config)# license accept end user agreement
Step 4 license boot level uck9
Example:
Router(config)# license boot level uck9
Step 5
exit
Example:
Router(config)# exit
Step 6 write
Example:
Router# write
Step 7
reload
Example:
Router# reload

Configuring the Voice Port

SUMMARY STEPS
1. enable
2. configure terminal
Purpose
Enables privileged EXEC mode.
• Enter your password, if prompted.
Enters global configuration mode.
Configures a one-time acceptance of the UC license.
• Accept the UC license by typing YES.
Enables the Unified Communication License Level license.
Returns to privileged EXEC mode.
Saves the configuration.
Reloads the router.
Cisco VG400 Voice Gateway Software Configuration Guide
Configuring the Voice Port
11