Cisco TES301 Quick Reference Manual

Activation
1. Once the device boots up, use the LCD menu to view the Internet status to verify that the gateway is connected to the Internet
as follows:
• Wave your hand over the LCD.
• Tap the up or down arrows repeatedly until the Internet Status icon is highlighted.
• Tap the right arrow. The Internet status page appears.
2. Tap the left arrow to exit this view.
3. To verify that your phone connection is set up properly, verify that the blue LED light on the top panel of the gateway is lit.
4. Follow the instructions in your owner's manual for your computer or other wireless device to activate the wireless connection.
Note: A wireless connection requires a wireless-enabled device with an 802.11b/g/n wireless network adapter installed.
ON/OFF
PHONE 2 PHONE 1
12V DC IN
Phone
Modem
5. You are now ready to confi gure your gateway. Refer to the Cisco Model TES301 IP Managed Services Home Gateway User
Guide for instructions to complete the setup of your gateway.
USB
INTERNET 4 3 ETHERNET 2 1
RESET
PC
802.11b/g/n
Wireless
Laptop
IPTV
Set-Top Box
REC SIG HD
EPC2425
Cisco Model TES301 IP Managed Services
Home Gateway
T14910
Americas Headquarters
Cisco Systems, Inc.
San Jose, CA
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at
www.cisco.com/go/trademarks. Wi-Fi Protected Setup is a trademark of the Wi-Fi Alliance. Other third party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1009R)
April 2011
The top panel of your TES301 provides a liquid crystal display
(LCD) screen for easy setup and confi guration. Use the touch
sensitive arrow keys to navigate through the menu options. The
top panel also provides light-emitting diode (LED) status icons
that indicate the operational state of your gateway.
1 Power (Green/Red)—The Power LED lights up when the
TES301 is powered on. The LED becomes red during a
malfunction.
2 WPS Touch-Sensitive Key (Amber)—Touch for 3 seconds to
initiate pairing with Wi-Fi devices.
3 LCD with Touch-Sensitive Keys—The LCD screen lights
up with the wave of your hand to display menu options
for common setup and confi guration functions. The touch
sensitive keys, indicated by the up, down, left, and right
arrows, help you navigate through the menus.
4 Phone 1-2 (Blue)—The LED lights up blue when it is
registered with the SIP server. It fl ashes to indicate voice mail
messages have been received.
1 2
Safety First
Your gateway comes with a CD that contains a user guide with
important safety information. Before installing this gateway, read
the Important Safety Instructions provided in the user guide.
1 2 3 4
T14939
Asia Pacific Headquarters
Cisco Systems (USA) Pte. Ltd.
Singapore
Quick Reference Guide
Europe Headquarters
Cisco Systems International BV Amsterdam,
The Netherlands
Part Number 4038300 Rev A