Cisco TES301 User Manual page 33

7 Connect the included power adapter to the TES301 power port, and then plug
the power adapter into an electrical outlet.
Note: The power adapter that shipped with your device may differ from the
illustration below.
8 Use the power switch on the back panel to power on the TES301. The power LED
on the front panel will light up as soon as the device powers on. The LCD will
light up with a message that the device is booting up.
9 Once the device boots up, use the LCD menu to view the Internet status to verify
that the gateway is connected to the Internet as follows:
a Wave your hand over the LCD.
b Tap the up or down arrows repeatedly until the Internet Status icon is
highlighted.
4038767 Rev B
Connecting the Home Gateway
15