Wi-Fi Mac Filter - Cisco TES301 User Manual

Wi-Fi MAC Filter

Wireless access can be filtered by using the MAC addresses of the wireless devices
transmitting within your network.
Option
Configuration View
Enabled / Disabled
Access Restrictions
Wireless Client List
4038767 Rev B
Description
Select Home Network to enable or disable Home Network
MAC Filter configuration. Select Guess Network to enable or
disable Guess Network MAC Filter configuration.
Select Enabled will enable Access Restrictions nad Wireless
Client List.
Prevent PCs listed below from accessing the wireless network.
Clicking this radio button will block wireless access by MAC
Address.
Permit PCs listed below to access the wireless network.
Clicking this radio button will allow wireless access by MAC
Address.
If you want to add any of the wireless clients to the Wireless
MAC Filter List, enter the appropriate MAC addresses into the
MAC field then click the Save Changes button.
Note: For each MAC field, the MAC address should be
entered in this format:
xxxxxxxxxxxx
Wi-Fi
67