Network - Mitel MiVoice 6900 Series Manual

S
ETTINGS MENU
Use the up and down navigation keys to select one of the following DECT Headset options.
6.
Status – If the user selects the Status option and presses the Save softkey, a pop-up notification
–
appears for 4 seconds showing the power, bandwidth, and the headset charge percentage
remaining.
Dump DECT Logs – If the user selects the Dump DECT Logs option and presses the Save softkey,
–
Collecting Logs... pop-up notification appears for 4 seconds while the phone collects DECT logs
internally and can be retrieved via the Settings Log Issue or the Web UI if applicable.
Wideband/Narrowband – If the user selects the Wideband/Narrowband option and presses the
–
Save softkey, the Configuring DECT pop-up notification appears for 4 seconds while writing new
bandwidth selection to the DECT module.
Very Low Power/Low Power/High Power – If the user selects the Very Low Power/Low
–
Power/High Power option and presses the Save softkey, the Configuring DECT pop-up notifica-
tion appears for 13 seconds while writing the new power selection to the DECT module and resetting
it to latch the new setting.
: High Power is also known as Normal Power.
NOTE
Reset – If the user selects the Reset option and presses the Save softkey, thePlease Wait... pop-up
–
notification appears for 13 seconds while performs a rapid disconnect/reconnect of the USB device.
This action re-enumerates the device and re-initializes the DECT Headset.
Restore Default – If the user selects the Restore Default option and presses the Save softkey, the
–
Please Wait... pop-up notification appears for 13 seconds while restoring the DECT module to its
factory default (Normal / Wideband) and resets the DECT module to latch the change.

Network

The Networkmenu allows you to configure the following network settings:
Static Network Settings
•
Ethernet Ports
•
VLAN Settings
•
802.1x
•
N
ETWORK
17