Table of Contents
Advertisement
SECTION 2
INSTALLING THE PRINTER
11. The "Finished software installation" window
opens. Do not select (check) the Print Test Page
as the Printer is not set up yet.
If desired; you can select (check) the "Set this
printer as the default printer" at this time.
Then click Next>.
12. The M Series Driver welcome window will still
be open. Click Exit to close this window.
13. Restart the computer to complete the installation.
The "M Series Driver" should now be available in your "Printer and Faxes" or "Devices and Printers"
folder.
Tip: After you have completed printer setup (ink tanks
installed, printhead cartridge installed, media feed setup); it
is a good idea to print a test page from the printer driver to
confirm that the printer driver and printer are
communicating. This is done by right-clicking on the "M
Series Driver" and selecting "Properties" (Printer properties
in Win7). Then click on the "Print Test Page" button.
16
Advertisement
Table of Contents
