Save And Load Menu; Expert Mode; Configuration Of Several Devices - NetMan 204 Installation And User Manual

Save and load menu

/------------------------/
/ Save and load
/------------------------/
Save changes...:<--
Revert changes.:
Reset default..:
With this menu the configuration can be saved to make it effective or to load other configurations
as described in the following table.
Function
Save changes
Revert changes
Reset default
(1)
see paragraph "Configuration of several devices"

Expert mode

Expert mode enables the configuration of advanced parameters that should be set by skilled
technicians. These commands are supported:
help
get
set <VAR> <VALUE>
sendtrap <TRAPCODE>
reboot
factoryreset
erasefram
exit
C
ONFIGURATION OF SEVERAL DEVICES
If several NetMan 204 have to be configured with similar parameters, you can configure the first
NetMan 204, then connect via FTP with the admin user, download all the configuration files in the
folder /cfg, and upload all them via FTP in the folder /cfg of all devices to be configured.
/
Description
Saves the configuration in flash memory and then automatically restarts to
make the changes effective
Cancels the changes and reloads the last saved configuration (excluding the
the clock -Time setting- configurations)
Loads the default configuration
prints the help
shows all values
set VAR to VALUE
send a test SNMP trap
reboot the NetMan 204
restore factory configuration
erase the FRAM module
closes the connection
- 33 -