Configuration Via Ssh Or Usb: Menu Description; Start Menu - NetMan 204 Installation And User Manual

C
ONFIGURATION VIA
In order to make a new configuration effective, it is necessary to save it in the flash
memory; this action automatically reboot the NetMan 204 (refer to "Menu Save and load").

Start menu

Once login has been effected via SSH or USB, a screen like the following is displayed:
/------------------------/
/ Netman 204
/------------------------/
Setup..........:<--
View status....:
Change password:
Service log....:
Expert mode....:
Press [ESC] for logout
SysVer. 1.0 - AppVer. 01.00.000
Function
Setup
View status
Change password
Service log
Expert mode
To move within this menu and the following menus, use the keys as described in the following
table; the arrow or the cursor shows the current selection.
Key
Direction keys (Arrow up, down, right, left)
Tab
(1)
Enter
(1)
Esc
(1)
Some keys can have a different function depending on the menu.
(2)
To exit from a menu a confirmation ('Y' or 'N') is required after pressing the ESC key.
SSH USB:
OR
/
Description
To enter main configuration menu
To see the status of the device
To modify the password
To generate a log file of the card (when requested by the service)
To enter Expert mode (more information at paragraph "Expert mode")
MENU DESCRIPTION
Function
To move the cursor within the menus
Goes on to next option
Choice of submenu
Confirmation of characters entered
(2)
Exit main menu
Return to previous menu
- 15 -