Setup Menu - NetMan 204 Installation And User Manual

Setup menu

The main configuration menu displays a screen like the following:
/------------------------/
/ Setup
/------------------------/
IP config......:<--
Time setting...:
UPS config.....:
Services 1.....:
Services 2.....:
Security.......:
Save and load..:
Press [Esc] to quit
SysVer. 1.0 - AppVer. 01.00.000 - Data from flash
From this main menu it is possible to access the various submenus, the function of each of which
is shown in the table below.
Menu
IP config
Time setting
UPS config
Services 1
Services 2
Security
Save and load
The screen also displays some messages describing the kind of configuration data displayed and
the status of the UPS. The meaning of these messages is described below.
• Data from flash: means that the configuration has been loaded from the flash memory
• Default data: means that the configuration has been reset to the default values
/
Function
To configure the network parameters
To configure the internal clock
To configure the type of UPS connected
To activate and/or deactivate device services
To configure the password and access to the network
To save a configuration: this action will reboot automatically the device.
- 16 -