Scheduled Ntp Menu; Ups Config Menu - NetMan 204 Installation And User Manual

Scheduled NTP menu

/------------------------/
/ Scheduled NTP
/------------------------/
NTP server.....:time_server
Sync only at...:13
Sync only at...:*
Sync only at...:1
Insert * where the value is not needed.
With this menu is possible to schedule the NTP synchronization. Is possible to specify the time and
frequency for performing a synchronization. For each field is possible to enter the precise condition
or leaving '*' which means always. On the example above, synchronization will be performed every
st
1 day of month at 13:00, regardless of the day of week.
Field
NTP server
Sync only at (h)
Sync only at (w)
Sync only at (m)

UPS config menu

/------------------------/
/ UPS config
/------------------------/
PRTK Code......:GPSER11201XX
Name...........:ups3
UPS Address....:1
Serial number..:324321
With this menu the UPS parameters must be set as described in the following table, for the UPS to
be able to communicate correctly with the device.
Field
PRTK Code
Name
UPS Address
Serial number
(1)
The PRTK code is formed of 12 alphanumeric characters.
/
hour (0 - 23)
day of week (0 - 6) (Sunday=0 or 7) OR sun,mon,tue ...
day of month (1 - 31)
Parameters to be inserted
Enter the name or address of the NTP server
Enter the hour when the synchronization should occur, or '*'
Enter the day of week when the synchronization should occur, or '*'
Enter the day of month when the synchronization should occur, or '*'
/
Parameters to be inserted
Enter the PRTK code indicated at the back of the UPS
Enter the identifying name of the UPS
Insert 1
Enter the UPS identification code
- 20 -
(1)