Activation 1 Menu; Services 2 Menu - NetMan 204 Installation And User Manual

Activation 1 menu

/------------------------/
/ Activation 1
/------------------------/
Enable SSH.....:[ON/off]<--
Enable HTTP....:[ON/off]
Enable SNMP....:[ON/off]
Enable UDP.....:[ON/off]
With this menu the services implemented in NetMan 204 can be activated or deactivated:
Use the ENTER key to change the selected configuration ("ON" or "OFF").
• ON (green characters): service active
• OFF (red characters): service not active
It is recommended to activate only the services used.

Services 2 menu

/------------------------/
/ Services 2
/------------------------/
WakeOnLan addr.:<--
WakeOnLan delay:
Activation.2...:
Sensors config :
I/O Sensors....:
Threshold sens.:
With this menu the configuration screens of the various services can be accessed as described in
the following table.
Menù
WakeOnLan addr.
WakeOnLan delay
Activation 2
Sensors. config
I/O Sensors
Threshold sens
As well as being configured, the services must also be activated to function correctly (see
paragraph "Activation 2 menu"). It is recommended to activate only the services used.
/
/
Funzione
To configure the Wake-on-LAN service
To configure the services to be activated
To configure the environmental sensors
- 26 -
Enable FTP.....:[ON/off]
Enable DataLog.:[ON/off]
Enable Email...:[on/OFF]
Enable Report..:[on/OFF]