Table of Contents
Advertisement
E
NVIRONMENTAL SENSORS
Is possibile to connect to NetMan 204 the environmental sensors for monitoring temperature,
humidity and digital input/output.
The information provided by these sensors can be showed with the UPS monitoring and control
software or with a web browser (the HTTP service must be active).
The values provided by the sensors may also be requested with SNMP according to the RFC 3433
standard (MIB files in the bundled CD).
Available sensors
•
Temperature: detects the environmental temperature in °C.
•
Humidity & Temperature: detects the relative humidity in % and the environmental
temperature in °C.
•
Digital I/O & Temperature: detects the environmental temperature in °C and features a
digital input and a digital output.
It is possible to connect up to 3 environmental sensor to a NetMan 204 (for sensor
installation please see the sensors' manual).
INSTALLATION
1.
Remove the cover of the UPS expansion slot by removing the two retaining screws.
2.
Insert NetMan 204 in the slot.
3.
Secure Netman 204 in the slot using the two screws removed previously.
4.
Connect the device to the network by means of connector RJ-45 (see "Specifications for the
cabling of the network cable")
(
)
OPTIONAL
- 12 -
- Quick Links:
- Network Port
- Http
- Installation
- Configuration Via Https
Hide quick links:
Advertisement
Table of Contents
