Installing Projector In Proper Position; Moving Projector - Sanyo PLC-SE15 Owner's Manual

PREPARATION
Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.
20˚
20˚
NO UPWARD
NO DOWNWARD
NO SIDEWAYS
Use Carry Handle when moving the projector.
When moving the projector, replace the Lens Cover and retract the
Adjustable Feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put it in a
suitable case (not supplied).
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
G Do not drop or bump the projector, otherwise damages or malfunctions may result.
G When carrying the projector, use a suitable carrying case.
G Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, consult your dealer for best
way.
10

INSTALLING PROJECTOR IN PROPER POSITION

Do not tilt the projector more than 20 degrees above and below.
Do not point the projector up to project an image.
Do not point the projector down to project an image.
Do not put the projector on either side to project an image.

MOVING PROJECTOR