Indicators And Projector Condition - Sanyo PLV-HF10000L Owner's Manual

Indicators and Projector Condition

Check the indicators for the projector condition.
The projector is operating normally.
Indicators
WARNING
POWER LAMP
TEMP .
green red
red
✽
Fig.1 Filter replacement icon and "Please wait... "
• • • on
• • • dim
• • • off
WARNING LAMP 1/2
SHUTTER
FILTER REP .
blue
orange orange
✽ ✽
✽
✽
✽
✽
✽
✽
✽ ✽
✽
✽
✽ ✽
✽ ✽
✽
✽
✽ ✽
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
Projector Condition
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
The projector is operating normally.
(The Shutter is open)
The projector is operating normally.
(The Shutter is closed)
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
cannot be turned on until cooling is completed and
the POWER indicator lights green.
The projection lamp is being cooled down in the
Power management mode.
The projector is in the Power management mode.
The projection lamp is being cooled down in the
Shutter management mode.
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the
projector.
The filter is scrolled using the FILTER button on
the remote control or the Filter control function in
the setting menu. When the filter is being scrolled,
the Filter replacement icon and "Please wait... "
message (Fig. 1) appear on the screen.
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)
• • • Differs according to conditions.
✽
Appendix
5