Wireless Access - LevelOne WBR-3407 User Manual

11g wireless adsl modem router
Hide thumbs Also See for WBR-3407:
Table of Contents

Advertisement

WBR-3407 User Guide
For incoming connections, you must use the Virtual Server or Firewall
Rules to specify the PC which will receive the incoming traffic.
You can also use the DMZ function. This should work with almost every
application, but:

Wireless Access

Problem 1:
My PC can't locate the WBR3407.
Check the following.
Solution 1:
Problem 2:
Wireless connection speed is very slow.
Solution 2:
The wireless system will connect at the highest possible speed, depending
on the distance and the environment. To obtain the highest possible
connection speed, you can experiment with the following:
It is a security risk, since the firewall is disabled.
Only one (1) PC can use this feature.
Your PC is set to Infrastructure Mode. (Access Points are always in
Infrastructure Mode)
The SSID on your PC and the WBR3407 are the same.
Remember that the SSID is case-sensitive. So, for example
"Workgroup" does NOT match "workgroup".
Both your PC and the WBR-3407 must have the same setting for WEP.
The default setting for the WBR-3407 is disabled, so your wireless
station should also have WEP disabled.
If WEP is enabled on the WBR-3407, your PC must have WEP
enabled, and the key must match.
If the WBR-3407's Wireless screen is set to Allow Trusted PCs only,
then each of your Wireless stations must have been designated as
"Trusted", or the Wireless station will be blocked.
To see if radio interference is causing a problem, see if connection is
possible when close to the WBR-3407.
Remember that the connection range can be as little as 100 feet in poor
environments.
WBR-3407 location.
Try adjusting the location and orientation of the WBR-3407.
Wireless Channel
If interference is the problem, changing to another channel may show a
marked improvement.
Radio Interference
Other devices may be causing interference. You can experiment by
switching other devices Off, and see if this helps. Any "noisy" devices
should be shielded or relocated.
RF Shielding
Your environment may tend to block transmission between the wireless
stations. This will mean high access speed is only possible when close
to the WBR-3407.
92

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents