LevelOne WBR-3407 User Manual page 47

WBR-3407 User Guide
Internet Authentication Service (Radius) Setup
1. Select Start - Programs - Administrative Tools - Internet Authentication Service
2. Right-click on Clients, and select New Client.
3. Enter a name for the access point, click Next.
4. Enter the address of the WBR3407, and set the shared secret, as entered on the WBR3407.
5. Click Finish.
6. Right-click on Remote Access Policies, select New Remote Access Policy.
7. Assuming you are using EAP-TLS, name the policy eap-tls, and click Next.
8. Click Add...
If you don't want to set any restrictions and a condition is required, select Day-And-Time-
Restrictions, and click Add...
9. Click Permitted, then OK. Select Next.
10. Select Grant remote access permission. Click Next.
Figure 38: Service Screen
Figure 39: Attribute Screen
44