Wireless Screen - LevelOne WBR-3407 User Manual

WBR-3407 User Guide

Wireless Screen

The WBR-3407's settings must match the other Wireless stations.
Note that the WBR-3407 will automatically accept both 802.11b and 802.11g connections, and
no configuration is required for this feature.
To change the WBR-3407's default settings for the WBR3407 feature, use the Wireless link on
the main menu to reach the Wireless screen. An example screen is shown below.
Data - Wireless Screen
Identification
Regulatory
Domain
Station name
SSID
(ESSID)
Figure 8: Wireless Screen
Select the correct domain for your location. It is your responsibility to
ensure:
•
That the WBR-3407 is only used in domains for which is licensed.
•
That you select the correct domain, so that only the legal channels
for that domain can be selected.
This is the same as the "Device Name" for the WBR-3407.
•
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
•
To communicate, all Wireless stations should use the same
SSID/ESSID.
16