Cleaning The Roller - Pandigital PhotoLink PANSCN01 User Manual

Cleaning the Roller

1. Follow the instructions above to clean the
outer casing of the scanner first.
2. Connect the power supply to the scanner.
3. With scanner power off, press and hold the
Power button for 5 seconds. The scanner will
enter cleaning mode. The Power and
Status/card indicators will be on.
4. Insert the supplied roller cleaning sheet as
shown. Note the direction of the black sponge
on the sheet when inserting.
Note: Make sure that there is no visible dust
on the sheet before inserting it into the feeding
slot.
5. The cleaning sheet will be brought into the
feeding slot automatically, and the cleaning
process will begin. During the cleaning
process, the Power and Status/card indicators
will blink slowly and simultaneously.
6. When the cleaning process is completed, the
cleaning sheet will be ejected from the
feeding slot, and the Power indicator will go
off.
Remove the cleaning sheet, store it in a safe
place and keep it away from dust.
19