Operating The Photolink Scanner; Preparation And Setup The Photolink Scanner - Pandigital PhotoLink PANSCN01 User Manual

Operating the PhotoLink Scanner

Preparation and Setup the PhotoLink Scanner

Notes:
Be sure to insert a memory card before scanning.
Be careful when inserting a CF card. The pins inside the CF
memory card slot are subject to damages easily, and such
damage is not recoverable. It's also not covered by the product
warranty.
The scanner only accepts memory cards in FAT16 or FAT32
format. NTFS and other file formats are not supported.
1. Peel off the tape that secures the guide lever.
Note: This step is only required when you use
the scanner for the first time.
2. Connect the plug on the power adapter cable
to the power socket on the scanner.
3. Plug the power adapter into a power outlet.
Note: The type of power plug and socket
illustrated may differ from that of your region.
4. Insert an unlocked (writable) memory card into
a suitable memory card slot. If both slots are
occupied, the scanner will take the following
priority when storing the scanned images:
SD (MMC) > CF > xD > MS/MS Pro/MS Duo
For example, if both SD and CF cards are
inserted, the scanner will store the scanned
images onto the SD card only.
9