Cleaning The Roller - Pandigital PhotoLink PANSCN04 User Manual

scanner) approximately every 50-100 scans, or if vertical lines
or stripes appear on the scanned image. Use only the
recommended and supplied tools to clean the scanner.
WARNING: Do not use any solvents or corrosive liquid

Cleaning the Roller

1. Clean the scanner's outer casing first, using only the
recommended and supplied tools.
2. Connect the power supply to the scanner.
(i.e., alcohol, kerosene, etc.) to clean any part
of the scanner, otherwise the plastic material
will be permanently damaged.
3. Press and hold the power button for 2
seconds to power the scanner on.
4. Press and hold the
for 2 seconds, which will cause the
scanner to enter the cleaning mode.
RESOLUTION
button
27