Calibrating The Scanner; Storing The Scanner - Pandigital PhotoLink PANSCN01 User Manual

Calibrating the Scanner

If the scanned image looks fuzzy or there are strange stripes on it,
then the scanner needs to be calibrated in order for the sensor to
resume its original precision. To calibrate the scanner:

Storing the Scanner

If the scanner will not be used for a prolonged period of time, follow
the instructions below to store the scanner for future use.
1. Disconnect the scanner from power supply.
2. Place the scanner and power adapter in a box or bag to keep
3. Place it in a cool and dry place where inaccessible to small
After long-term storage, it is recommended that you clean and
calibrate the scanner before use.
1. Follow the instructions on page 19 and 20 to
clean the roller and image sensor, and then
follow the instruction in "Preparation and setup
PhotoLink
prepare the scanner for scanning.
2. Insert the calibration card as shown. The
scanner will scan the pattern on the calibration
card and perform calibration to the sensor
inside automatically.
Note: Make sure that the calibration card is
inserted in the correct direction. Otherwise the
calibration won't work.
them from accumulation of dust.
children.
Scanner on page 8 to
21