Pandigital PhotoLink PANSCN01 User Manual page 11

2. The original photo will be fed into the slot and
scanned automatically. The Power and
Status/card indicators blink while scanning.
Note: See "More information" on page 16 for
how to insert photos and other types of originals.
3. When scanning is completed, the Power and
Status/card indicators will keep blinking for a
while, indicating that the scanner is processing
the image and storing the file onto the memory
card.
Wait until the indicators stop blinking before
inserting and scanning the next original.
WARNING: Insert only one sheet at a time.
Insert the next original photo only when the
previous one is done. Otherwise the scanner will
fail to function normally.
Notes:
Don not remove the memory card or
disconnect the power supply while the
indicators are blinking.
This scanner only supports output images in
JPEG (.jpg) format, and the date/ time attribute
will not be added.
For more information on how this scanner
stores the scanned image files on the memory
card, see "Orientation of the original and
scanned image" on page 16.
If the memory card is near full (lower than
1MB), the Status/card indicator blinks (see
"indicators" on page 8). Use another card or
delete some files on it if necessary.
11