Code 39 Length 1, Length 2 Programming Instructions; Quiet Zones - Datalogic Magellan 1100i Product Reference Manual

Symbologies

Code 39 Length 1, Length 2 Programming Instructions

1. Scan the START/END barcode.
2. Scan either the Set Length 1 or Set Length 2 barcode.
3. Turn to
NOTE
4. Scan the START/END barcode.
START / END
DEFAULT SETTING FOR THIS FEATURE: 02
Set Length 2

Quiet Zones

This feature enables/disables the requirement that quiet zones must be present for Code 39 bar-
codes.
START / END
Require Quiet Zones
110
Appendix C, Alpha-Numeric Pad
the length in decimal notation.
For Code 39 barcodes, all check, data and full
ASCII shift characters are included in the
length calculations. Start/Stop characters are
not included.
PROGRAMMING BARCODES
PROGRAMMING BARCODES
and scan the two digits (zero padded) representing
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 50
Don't require Quiet Zones
DEFAULT
Magellan TM 1100i