Length Control - Datalogic Magellan 1100i Product Reference Manual

Interleaved 2 of 5 — continued

Length Control

Fixed Length Decoding—
barcode if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
decode a barcode if the label length falls in the range of the configurable minimum and maxi-
mum length.
Configuring Fixed Length Decoding:
1. Scan the START barcode.
2. Scan the Fixed Length Decoding barcode.
3. Scan the END barcode.
4. Set Length 1 to the first fixed length by following the
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed length) by fol-
Configuring Variable Length Decoding:
1. Scan the START barcode.
2. Scan the Variable Length Decoding barcode.
3. Scan the END barcode.
4. Set Length 1 to the first variable length by following the
5. Set Length 2 to the second variable length by following the
START / END
Fixed Length Decoding
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a
Programming Instructions below.
Interleaved 2 of 5 Length 1, Length 2 Programming Instructions
lowing the
2 Programming Instructions
Length 2 Programming Instructions
PROGRAMMING BARCODES
When variable length decoding is enabled, the scanner will
below.
below.
Variable Length Decoding
Interleaved 2 of 5
Interleaved 2 of 5 Length 1, Length 2
below.
Interleaved 2 of 5 Length 1, Length
Interleaved 2 of 5 Length 1,
DEFAULT
121