Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep and/or flash its green
LED) upon successfully reading a barcode. Choices are:
•
•
•
NOTE
After Decode
DEFAULT
³
After CTS goes inactive, then active
Product Reference Guide
Good Read = Indicate after decode
Good Read = Indicate after transmit
Good Read = Indicate after CTS goes inactive, then activ
This option (Indicate after CTS goes inactive,
then active), which uses CTS, is only valid for
RS-232 interfaces.
PROGRAMMING BARCODES
LED and Beeper Indicators
e
START / END
After Transmit
15