Getting Started
LED and Beeper Indicators
The scanner's beeper sounds and its green LED illuminates to indicate various functions or
errors on the scanner. The tables below list these indications. One exception to the behaviors
listed in the tables is that the scanner's functions are programmable, and may or may not be
turned on. For example, certain indications, such as the power-up beep can be disabled using
programming barcode labels.
Green LED Indications
LED
INDICATION
Power-on
Bright green flash
indication
Good Read
Bright green flash
Indication
Scanner
Constant dim green
Ready
Constant green flash
Sleep Mode
(100mS on, 1900mS off)
Constant green flash at 1 Hz
Host Disable
(100mS on, 900mS off)
Varies (see
Diagnostics
page 1-5
Prog. Mode
See
BEEPER FUNCTIONS
BEEPER
INDICATION
Power On
Single beep
Beep
Good Read
Single beep
Indication
Varies (see
Diagnostics
page 1-5
Programming
Varies depending upon the fea-
Mode
ture(s) being configured.
Indications
4
INDICATION
Error Codes on
for more information)
above.
Host Disable
INDICATION
Error Codes on
for more information)
COMMENT
Indicates the scanner has finished all its power up tests
and is now ready for operation.
Indicates a barcode has been read and decoded.
The scanner is ready for operation.
The scanner is in Sleep Mode. To wake the scanner up,
move an object in front of its window or press the button
atop the unit.
The scanner is disabled due to receiving a disble com-
mand from the POS terminal.
The LED can provide diagnostic feedback if the scanner
discovers a problem during SelfTest.
The scanner is in Programming Mode.
COMMENT
The Power-On LED indication is a configurable feature
which can be enabled or disabled. When enabled, this
beep Indicates the scanner has finished all its power up
tests and is now ready for operation.
The good read beep indication is configurable. Options
include: Enable/disable, frequency, duration and vol-
ume. See the Product Reference Guide (PRG) for
more information.
The Beeper can provide diagnostic feedback if the
scanner discovers a problem during SelfTest.
The Beeper will sound as programming barcode labels
are scanned, indicating progress during scanner con-
figuration.
Magellan
TM
1100i