-in the decorated board below back windshield;
Notice: if the windshield is pasted with metal thermal-protective coating or
heating coating, It may affect the receiving signal. In this case, please change
the installation place.
4.3 Device outlet specification
Line No. Specification
1. 2
Keypod
3. 4
MIC-,MIC+
5
TX
6
RX
7
GND
8
MOTOR
9
ACC
10
V-
11
V+
Notes of the relay wiring
The relay wiring of pump: oil connectors of both ends are a fine white line (85)
and a fine yellow line (86). The fine white line (85) is connected to vehicle
Color
Orange/ orange
Black/ Red
Green
White
Black
Yellow
Orange
Black(thick)
Red(thick)
Instruction
Connect to SOS button
Connect to Microphone
Sending data (TX)/backup
Receiving data (RX)/backup
Ground wire
Connect to relay control line
Connect to ACC ignition
Vehicle 12V/24V negative storage battery
Vehicle 12V/24V positive storage battery