Operation Of Device - Concox GPS Vehicle tracker User Manual

6. Operation of device

6.1 Power on/ Power off
Power on: Once insert a valid SIM card and connect all the wires, turn on the
device, then Power LED will flash first, During signal searching process, GSM
and GPS LED will flash. Once GPS LED keeps solid light, it means the device
has been located and it starts to work.
Power off: Just turn off the power switch.
The device will begin to upload positioning data to server once inserting a valid
SIM card and power on. During the working time, it can upload data to server
every 10 seconds.
6.2 Check location
1. Via SMS
1.1 SMS "WHERE#", to the SIM number of device. The device will send a
location message automatically. You can get the coordinates. If the device
does not search any information of location, it will send "No data" to the cell
phone.
Example:
Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-
11-23 22:28:51
1.2 SMS "URL#", to the SIM number of device. The device will send a location
Google Map link. If the device does not search any information of location, it
will send "No data" to the cell phone.
Example:
<Date Time：10-11-23 23:42:51> http://maps.google.com
/maps?q=N22.571490,E113.877103
2. Via platform
Go to the platform website offered by dealers to check your vehicle location.
6.3 SOS alarm
In emergent case, press SOS for 3s to activate SOS alarm. Then the device
will send SOS SMS to preset specific numbers and then dial the numbers in
circles until the call is picked up. At the meantime, the device will upload SOS
alarm data to the server. And it will send:
SOS Alarm! <DateTime:11-06-17 14：53：06>，
http://maps.google.com/maps?q=N22576713,E113.916585
Note: The specific numbers should be preset, just refer to 6.4
6.4 Wire cut-off alarm