The fields that can be configured are described below:
Parameter
Usage Threshold
Trap State
Click the Apply button to accept the changes made.
PoE Status
This window displays the PoE status of each port.
To view the following window, click System > PoE > PoE Status, as shown below:
Note: For the PoE Status table, if the classification was shown as "Legacy PD", it will be
classified to non-AF PD or Legacy PD.
Description
Enter the usage threshold to generate a log and send the
corresponding standard notification.
Select this option to enable or disable the sending of PoE
notifications.
Figure 5-8 PoE Status window
2
2
4
4
D-Link DGS-1100 Series Switch User Manual