Sntp Settings - D-Link DGS-1100-16 Reference Manual

Parameter
Summer Time State
Time Zone
The fields that can be configured for Date Setting are described below:
Parameter
From: Date of the Month
From: Month
From: Year
From: Time (HH:MM)
To: Date of the Month
To: Month
To: Year
To: Time (HH:MM)
Offset
Click the Apply button to accept the changes made.

SNTP Settings

This window is used to configure the time settings for the Switch.
To view the following window, click System > Time > SNTP Settings, as shown below:
The fields that can be configured for SNTP Global Settings are described below:
Parameter
SNTP State
Pool Interval
Click the Apply button to accept the changes made.
Description
Select the summer time setting. Options to choose from are
Disabled, and Date Setting.
Disabled - Select to disable the summer time setting.
Date Setting - Select to configure the summer time that
should start and end on the specified date.
Select to specify your local time zone's offset from
Coordinated Universal Time (UTC).
Description
Select date of the month that summer time will start.
Select the month that summer time will start.
Enter the year that the summer time will start.
Select the time of the day that summer time will start.
Select date of the month that summer time will end.
Select the month that summer time will end.
Enter the year that the summer time will end.
Select the time of the day that summer time will end.
Enter the number of minutes to add during summer time. The
default value is 60. The range of this offset is 30, 60, 90 and
120.
Figure 5-15 SNTP Settings window
Description
Select this option to enable or disable SNTP.
Enter the synchronizing interval in seconds. The value is
from 30 to 99999 seconds. The default interval is 720
seconds.
2 2 9 9
D-Link DGS-1100 Series Switch User Manual