Unpacking Instructions - Life Fitness 9500 Series Service Manual

Life Fitness Model 9500 Series Cross-Trainers
UNPACKAGING INSTRUCTIONS
1. Remove all staples from the corrugated shipping container and fold down the four sides of the base tray (A).
2. Lift and open the top flaps of the shipping container sleeve (B). Lift and remove the four corner posts (C). Lift
and remove the top support (D) and the side supports (E).
3. With the help of another person, carefully lift the shipping container sleeve (B) up and off of the base tray (A)
and over the Cross-Trainer (F). Remove the remaining boxes and packaging from the Cross-Trainer deck and
set aside.
4. Remove the protective plastic sheet covering the Cross-Trainer (F).
5. Remove the glued-in block (G)
located in front of the Cross-
Trainer on the base tray (A). With
the help of another person, lift the
rear of the unit and roll the unit
forward beyond the flattened base
tray.
6. Follow Installation
included in the
complete the assembly of your
Cross-Trainer.
SAVE YOUR PACKING MATERIAL IN CASE OF RETURN
Instructions
parts bag to
3