Life Fitness 9500 Series Service Manual page 35

Life Fitness Model 9500 Series Cross-Trainers
How To... Replace the Tray Assembly
Tools required: Socket set or Open end wrench, Phillips screwdriver
1. Turn power OFF at the ON/OFF switch and unplug ac line cord from electrical outlet.
2. Remove the SCREWS (4) securing the DISPLAY CONSOLE to the MONO-COLUMN ASSEMBLY.
Disconnect STOP SWITCH/TELEMETRY CABLE from CONSOLE CONNECTOR.
HELPFUL HINT: PLACE DISPLAY CONSOLE BACK ONTO MONO-COLUMN AND ATTACH A COUPLE OF
3. Remove SCREWS (4) securing TRAY ASSEMBLY to MONO-COLUMN.
4. Reverse steps 1 through 4 to return parts to proper
position.
CAUTION: WHEN REPLACING TRAY ASSEMBLY THE
TELEMETRY CABLE JACK MAY BECOME
DISCONNECTED FROM RECEIVER.
DISPLAY MOUNTING SCREWS TO HOLD DISPLAY.
Screws
Model 9500HR Shown
Monocolumn
Assembly
3