Using The Om-50 Microphone (Optional) - Canon optura Xi Instruction Manual

Using the
DM·50
Microphone (Optional}
The high sensitive Directional Stereo Microphone DM-50 attaches to the,,$"
advanced accessory shoe for cable-free operation and is powered by the camcorder's
power supply. Use it for recording or dubbing audio.
Refer also to the DM-50 Microphone instruction
.manual.
a
Always turn the camcorder off before attaching/removing the microphone.
a
Do not connect any microphone to the MIC terminal when the OM-50
Microphone is connected.
a
Do not carry the camcorder by the microphone.
1. Remove the accessory shoe cover.
2. Slide the microphone into the
accessory shoe until it clicks.
3. Tighten the shoe lock.
Make sure that the microphone is securely
attached to the camcorder.
4. Set the camcorder to CAMERA or
CARD CAMERA mode.
II
[!J
II
(Connection) appears.
5. Set the microphone's directivity
switch.
• SHOTGUN: For recording clear sound from
the front (monaural).
• STEREO 1: For recording sound from the
front and surrounding area.
• STEREO 2: For recording surrounding
sound in a wider range than in
STEREO 1.
-
o
C
-hU'l
"T1
:i.
m{,Q
r+ r+
r:: ::r
~
to
U'l
"T1
§:
::tI
OJ
:::s
{,Q
to
81