Mv550I Using The Dm-50 Microphone (Optional) - Canon MV550I Instruction Manual

MV550i
The highly sensitive Directional Stereo Microphone DM-50 has been designed
exclusively for camcorders equipped with an advanced accessory shoe
powered by the camcorder's power supply. Use during cassette recording or audio
dubbing (
Refer to the DM-50's instructions for further details.
Turn the camcorder's power off before attaching/removing the microphone.
1. Slide the microphone onto the accessory shoe and tighten with the
shoe lock.
• Slide in the direction of the arrow on the bottom of the microphone until it
clicks securely into place.
• Make sure that the microphone does not come disconnected when turning
the shoe lock.
2. Set the camcorder to TAPE CAMERA mode.
• (Connection) appears in the display.
C
3. Set the microphone's directivity switch.
SHOTGUN: Clearly picks up sound arriving from the front of the microphone
STEREO1: Picks up sound arriving from the front of, as well as sound
STEREO2: Picks up sound surrounding the microphone in a wider range than
Notes:
• Never carry the camcorder holding the microphone.
• The DM-50 will not pick up any sound if another microphone is attached to the
camcorder's microphone terminal.
Downloaded From VideoCamera-Manual.com Manuals
Using the DM-50 Microphone (optional)
98).
(monaural).
surrounding the microphone.
STEREO 1.
E
. It is
75