Using The Dm-50 Microphone (Optional) - Canon MVX100 Instruction Manual

Using the DM-50 Microphone (Optional)

The high sensitive Directional Stereo Microphone DM-50 attaches to the
E
advanced accessory shoe for cable-free operation and is powered by the camcorder's
power supply. Use it for recording or dubbing audio.
Refer also to the DM-50 Microphone instruction manual.
❍ Always turn the camcorder off before attaching/removing the microphone.
❍ Do not connect any microphone to the MIC terminal when the DM-50
Microphone is connected.
❍ Do not carry the camcorder by the microphone.
1. Remove the accessory shoe cover.
2. Slide the microphone into the
accessory shoe until it clicks.
3. Tighten the shoe lock.
Be careful that the microphone does not
come off when tightening the shoe lock.
4. Set the camcorder to CAMERA or
CARD CAMERA mode.
(Connection) appears.
5. Set the microphone's directivity
switch.
• SHOTGUN: For recording clear sound from
• STEREO 1: For recording sound from the
• STEREO 2: For recording surrounding
74
the front (monaural).
front and surrounding area.
sound in a wider range than in
STEREO 1.
q
w
r
t
e