Canon optura Xi Instruction Manual page 107

7. Press the STOP. button on the wireless controller
to stop dubbing.
Audio device: Stop playback.
_ Set the zero set memory at the end of the scene you wish to dub audio. The
~
camcorder will automatically stop audio dubbing at that point.
e1Ia~jJggm'J8aiotik:w1b:e1$A£lldehaWkStgAJ.;gldW'i!tTtT@@mi@m1\WWWWMiiWMMWiiTWiI1UiWfiB@t!i£JDWW%'i!;@'i!wn;;@;m:rTMwr0MBMwB
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
PI..AY; (MeR)
1. Press the 12bit AUDIO OUT button on the wireless
controller.
m
C.
;:+.
:i"
~
-
SE!rolSillCr~SEi:Fi:"
?~O
AU~000EEN
POEOODAOE
• A bar showing the balance appears for 4 seconds.
I -
"'Rn
-l-
~""""",l.--
• Press the ST-1 button to increase the volume of Stereo 1 and the ST-2 button to
increase the volume of Stereo 2.
• The setting changes with each press of the button.
• STERE01: Plays back the original sound.
• STERE02: Plays back the added sound.
• MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.
• MIXNARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.
2. If you have selected [MIX/VARI.], adjust the mix
balance with the ST-1/ST-2 buttons on the wireless
controller.
_ The camcorder resets to [STEREO 1] when you turn the camcorder off. However,
~
the mix balance is memorized by the camcorder.
107