Mv650I Using The Dm-50 Microphone (Optional) - Canon MV650i Instruction Manual

3_D73PAL_E(43-85) 02.12.26 9:26 PM Page 73
Using the DM-50 Microphone (Optional)
MV650i
The high sensitive Directional Stereo Microphone DM-50 attaches to the
advanced accessory shoe for cable-free operation and is powered by the camcorder's
power supply. Use it for recording or dubbing audio.
Refer also to the DM-50 Microphone instruction manual.
❍ Always turn the camcorder off before attaching/removing the microphone.
❍ Do not connect any microphone to the MIC terminal when the DM-50
Microphone is connected.
❍ Do not carry the camcorder by the microphone.
1. Slide the microphone into the
accessory shoe until it clicks.
2. Tighten the fastening screw.
Be careful that the microphone does not
come off when tightening the screw.
3. Set the camcorder to CAMERA or
CARD CAMERA mode.
(Connection) appears.
4. Set the microphone's directivity
switch.
• SHOTGUN: For recording clear sound from
the front (monaural).
• STEREO 1: For recording sound from the
front and surrounding area.
• STEREO 2: For recording surrounding
sound in a wider range than in
STEREO 1.
Downloaded From VideoCamera-Manual.com Manuals
E
q
e
r
w
73